Montana Cans VINTAGE spray for a vintage effect on paintings, prints, photos, furniture or decorative objects.
- Very high surface hardness
- Very good adhesion
- Short drying time
- Sandable after 5-6 hours with fine sandpaper
- Light resistant
- Can be combined with other Montana spray paints or Acrylic Markers.
INSTRUCTIONS FOR USE
Shake can vigorously for 2-3 minutes before use. Make sure that the substrate/ underlying paint / paint layer is completely dry. Remove dust, rust and dirt particles. Apply min. 2-3 layers crosswise. Wait 5 minutes between each layer. An especially realistic effect is achieved by an uneven application of paint. The more coats applied, the more intense the yellowing effect.
Sealing with Montana Varnish for protection is recommended.
Always test spray on a non-visible area to check the compatibility of lac-quer or paint. For optimal lifespan, store cans with the nozzle on.
- Shake can well for 2-3 minutes.
- Spray distance 20-25cm
- The substrate / underlying paint / paint layer should be completely dry
- Remove dust and dirt particles.
- When applying on metals, rust spots should be completely removed and, if necessary, filled.
- Apply min. 2-3 layers crosswise.
- Drying time between layer min. 5min.
- An especially realistic effect is achieved by an uneven application of paint
- The more coats applied, the more intense the yellowing effect.
- Best results are achieved on light/white surfaces.
- For outdoor objects, an additional sealing with Montana Varnish is recommended.
- By partial sanding, with a fine sandpaper (grain size max. 120), of the applied effect or by dabbing with a crumpled paper or sponge in the still wet paint this effect can be intensified.
PRODUCT NAME: Montana VINTAGE Spray
HS CODE: 32089019
COUNTRY OF ORIGIN: Germany
NOZZLE: Montana Flat Jet Cap Medium
RECOMMENDED NOZZLES: Flat medium and wide
LAQUER BASE: Acrylic
PRESSURE LEVEL: Low pressure
COLOR RANGE: -
GLOSS LEVEL (60° angle according to DIN 67530): 13 GE matte
HEAT RESISTANCE: Up to 80°C (176°F)
APPLICABLE ON: Synthetic resin, NC or acrylic paints after only 3 hours.
DRYING TIME AT 20°C (68°F) AND 50% RELATIVE HUMIDITY:
- Dust dry: after approx. 5 min
- Touch dry: approx. 30 min.
- Fully cured after 24 h
Drying time depends on temperature, humidity and thickness of coating.
OPTIMAL PROCESSING CONDITIONS:
- Temperature 10° - 25°Celcius
- Surface temperature 5° - 40°Celcius
- Air humidity max. 60%
SHELF LIFE / STORAGE: 10 years with proper storage (10°-25°C, relative humidity of max. 60%).
DANGEROUS GOODS INFORMATION
- Dangerous goods class 2.1
FREQUENTLY ASKED QUESTIONS
What is Montana VINTAGE 400ml spray and how does it work?
Montana VINTAGE 400ml spray is a low-pressure, solvent-based, high quality acrylic paint, that when applied, creates the aesthetic of a vintage or aged look. The Montana VINTAGE 400ml is a yellow transparent coating that is uv resistant and dries in a semi gloss finish.
What can I use Montana VINTAGE 400ml spray for?
Montana VINTAGE 400ml spray is ideal for interior or exterior use and can applied to objects and artworks to give them an aged appearance, as if the were originally created a long time ago. Black and white photos can become vintage in no time. New furniture or signage can receive a retro touch in seconds.
How do I get the most vintage look out of my Montana VINTAGE 400ml spray?
Where applicable (not on photos), Montana VINTAGE 400ml works best if applied in thin, even, multiple coats. Light colored prints, pre-primed surfaces that are primed in white or light colors offer the best results. We recommend pre-priming with the Montana GOLD color SHOCK WHITE. Multiple layers of the VINTAGE, irregular coating and smooth sanding (when fully cured) will intensify the used look effect.
How do I start using my Montana VINTAGE 400ml spray can?
Remove the spray nozzle and turn the can upside down. Strike with your palm allowing safety ring to fall out. Shake vigerously for 2-3 minutes ensuring you can hear the mixing balls moving freely. Replace the cap back onto the top of the can valve and trigger away from substrate to test. If flowing freely you can start painting.
Which surfaces can I use my VINTAGE 400ml spray on?
Montana VINTAGE 400ml spray can be used on smooth, rough and primed surface such as surfaces that are printed, painted, furniture photos and many more substrates.
How long does Montana VINTAGE 400ml spray take to dry?
The drying time for Montana VINTAGE 400ml spray varies depending on substrate, ambient temperature and levels of humidity. Dust dry occurs in apx. 10 minutes, touch dry in one hour and curing occurs after 24 hours.
Is Montana VINTAGE 400ml spray as durable as other sprays?
The Montana VINTAGE 400ml spray has UV blockers within the paint binder ensuring durability is premium as in the other transparent colors within the Montana GOLD range. Longevity and durability can be increased by applying Montana VARNISH over the finished work once the Montana VINTAGE 400ml spray has completely cured.
How far should I hold the can away from the substrate while painting?
Optimum distance from substrate is normally beween 15 and 25cm depending on your task. Thin, even layers are optimal.
Can I paint over my VINTAGE 400ml with other paints?
You can apply other paints and effect coatings over VINTAGE 400ml including Montana GOLD, Montana BLACK, Montana WHITE, Montana ACRYLIC markers as well as customary acrylic paints. It is important that the VINTAGE 400ml spray is completely cured for 24-48 hours.
This technical application information is given to the best of our knowledge. However, it is only intended as non-binding information and does not release you from the obligation to carry out your own tests on the products supplied by us to determine their suitability for the intended applications. Application and processing are beyond our control and are therefore in the responsibility of the user. Montana Cans shall be released from liability
unless the liability-based incident is caused by a fault incurred to Montana Cans.