Montana NIGHTGLOW Effect Spray is a high-grade acrylic quality which contains luminescence-pigments, that store light (absorbed energy) and emit the light in darkness.

Note: Always test beforehand, if surface/material is compatible!

- Stores and emits daylight or UV light

- Covering on various surfaces such as canvas, concrete, wood, paper, var. plastics or metals, etc.

- Low UV- and weather resistance (according to other fluorescent colors) and therefore preferably used indoors or without direct exposure to UV radiation

Shake can vigorously for 2-3 minutes before use until mixing balls can be heard. Apply in min. 2-3 thin layers in a crossing over way. Choose a bright surface to apply on to achieve the bst glow effects. We recommend to prime the ground with Montana GOLD Shock WHITE 9100. Consider longer drying time depending on substrate. To improve resistance, we recommend to varnish with Montana VARNISH Gloss 400ml. Recommended to use with Montana Fatcaps (e.g. black / orange).

Always test spray on a non-visible area to check the compatibility of lacquer or paint. For optimal lifespan, store cans with the nozzle on.
​

PRODUCT NAME: Montana Cans EFFECT NIGHT GLOW

ITEM#: 448485 and 448492

EAN-CODE: 4048500448485 and 4048500448492

HS CODE: 32082090

COUNTRY OF ORIGIN: Germany

CONTENT: 400ml

NOZZLE: Fat Cap Black/Orange
​

RECOMMENDED NOZZLES: Level 4-6, Fat-Cap White/ Orange

LAQUER BASE: Acrylic

PRESSURE LEVEL: High-Pressure

COLOR: 2

GLOSS LEVEL (60° angle according to DIN 67530): 3 GE matte

HEAT RESISTANCE: Up to 80°C (176°F)

COVERAGE: Low

OVERPAINTING: Can be overpainted with Synthetic- or Acrylic Lacquer after approx. 24 hours drying time

DRYING TIME AT 20°C (68°F) AND 50% RELATIVE HUMIDITY:

- Dust/Touch dry: approx. 15/60 min.

- Overpainting after 24h

- Fully cured after 24h

Drying time depends on temperature, humidity and thickness of coating.
​

OPTIMAL PROCESSING CONDITIONS:

- Temperature 10° - 25°C/50 - 77°F

- Surface temperature 5° - 40°C/40 - 105°F

- Air humidity max. 60%

SHELF LIFE / STORAGE: 10 years with proper storage (10°-25°C, relative humidity of max. 60%).

- Dangerous goods class 2.1

- UN1950

- Shake the can well for at least 3 minutes until mixing balls can be heard

- Spray distance should be at least 20cm/8in

- Test spray on a non-visible area

- Apply in min. 2-3 thin layers in a cross over way

- Choose a bright surface to apply on – pretreatment with S9100 will enhance luminance and productivity

- Can be sealed with Varnishes (luminance will be slightly reduced)

- Luminescent periods and intensity depend on layer thickness and exposition time to light source

FREQUENTLY ASKED QUESTIONS

What is Montana NIGHTGLOW 400ml spray and how does it work?

Montana NIGHTGLOW EFFECT 400ml spray is a high pressure, high-grade nitro-acrylic based paint, that contains light emitting luminescent pigments. NIGHTGLOW EFFECT 400ml spray stores light as absorbed energy (charged) and emits that energy (as light), when in total darkness.

How long does Montana NIGHTGLOW EFFECT 400ml spray glow for?

Montana NIGHTGLOW EFFECT 400ml spray emits light for varying periods of time and at varying strengths. The glow effect is subject to the intensity and length of the exposure to light (that charges) and the amount of NIGHTGLOW EFFECT spray applied. The highest emission of light occurs immediately after charging.

How do I get the most glow out of my Montana NIGHTGLOW 400ml spray?

Montana NIGHTGLOW EFFECT 400ml spray works best if applied in thin, even, multiple coats. Pre-primed surfaces that are primed in white or light colors offer the most radiance. We recommend pre-priming with the Montana GOLD color SHOCK WHITE. The stronger the light source used for charging the paint, the greater the emission of light. The NIGHTGLOW effect is best viewed in total darkness, without other light sources.

How do I start using my Montana NIGHTGLOW EFFECT 400ml spray can?

Remove the spray nozzle and turn the can upside down. Strike with your palm allowing safety ring to fall out. Shake vigerously for 2-3 minutes ensuring you can hear the mixing balls moving freely. Replace the cap back onto the top of the can valve and trigger away from substrate to test. If flowing freely you can start painting.

Which surfaces can I use my NIGHTGLOW EFFECT 400ml spray on?

Montana NIGHTGLOW EFFECT 400ml spray can be used on smooth, rough and primed surfaces like metal, wood, hard plastics, primed carton and walls etc. NIGHTGLOW EFFECT 400ml spray can be used for interior or exterior projects.

How long does Montana NIGHTGLOW EFFECT 400ml spray take to dry?

The drying time for Montana NIGHTGLOW EFFECT 400ml spray varies depending on substrate, ambient temperature and levels of humidity. Please note a longer drying time then other Montana Cans spray products is required.

Is Montana NIGHTGLOW EFFECT 400ml spray as durable as other sprays?

Due to the completely man-made synthetic nature of the luminous pigments in NIGHTGLOW EFFECT 400ml spray, Montana NIGHTGLOW EFFECT 400ml spray has limited resistance to weathering, the ellements, light and UV influences. To increase its durability, apply Montana GLOSS VARNISH spray after the NIGHTGLOW EFFECT 400ml spray has completely dried and cured.

How far should I hold the can away from the substrate while painting?

Optimum distance from substrate is normally beween 15 and 25cm depending on your task. Thin, even layers are optimal.

What nozzle should I use to apply NIGHTGLOW EFFECT 400ml spray?

We recommend the use of fat cap nozzles on the NIGHTGLOW EFFECT 400ml spray. (e.g black/Orange cap)

How do I prevent getting drips?

Drips occur when the can is too close to the substrate during application, or spray passes occuring too slowly. You can either hold the can further away from the spray surface or increase the speed of your spray motion.

Pls Note:

This technical application information is given to the best of our knowledge. However, it is only intended as non-binding information and does not release you from the obligation to carry out your own tests on the products supplied by us to determine their suitability for the intended applications. Application and processing are beyond our control and are therefore in the responsibility of the user. Montana Cans shall be released from liability

unless the liability-based incident is caused by a fault incurred to Montana Cans.