Skip to main content
BLACK
Updated over a week ago
MONTANA-BLACK-SPRAY-400ML_SMALL.jpg

GENERAL INFORMATION

Special Color spray used for Graffiti/Urban Art/ Street Art purposes.

Note: Always test beforehand, if surface/material is compatible!

FEATURES

- Very good adhesion

- Can be used on almost any surfaces

- Short drying time

- Very high coverage (highly pigmented)

- Can be overpainted quickly

- Very good elasticity of cured paint

- Very good lightfastness

- Very good weather resistance

- Winter proof

- Constant pressure

- After curing compatible to Acrylic Markers, Acrylic Paint, Gouache, Inks and Chalk.

INSTRUCTIONS FOR USE

Shake can vigorously for 2-3 minutes before use. Apply paint in several thin layers, spraying in sweeping motions. Allow each coating to dry for at least 5 minutes. Further coats of alternative products might require a drying time of 24 hours or more depending on application style. Always test spray on a non-visible area to check the compatibility of lacquer or paint. For optimal lifespan, store cans with the nozzle on.

APPLICATION INFORMATION

- Surfaces should be dry and clean of oil, dirt or rust

- Shake the can well for at least 3 minutes

- Spray distance should be at least 15-20cm

- Test spray on a non-visible area

- Apply at least 2-3 layers in a grid pattern. Leave every layer to dry at least 5 min.

- To expand the lifespan of the paint layer, it should be treated with Montana Varnish Spray

PRODUCT INFORMATION

PRODUCT NAME: Montana Cans BLACK

ITEM#: Miscellaneous

EAN-CODE: Miscellaneous

HS CODE: 32082090

COUNTRY OF ORIGIN: Germany

TECHNICAL INFORMATION

CONTENT: 400ml

NOZZLE: Montana Fat Cap Black/Orange

RECOMMENDED NOZZLES: Montana Level 1-6

LAQUER BASE: Nitro Combi Base

PRESSURE LEVEL: High pressure (3,6 Bar at 15°C)

COLOR RANGE: 187 colors

GLOSS LEVEL (60° angle according to DIN 67530): 5 GE matte

HEAT RESISTANCE: Up to 80°C (176°F)

COVERAGE: Very Good

OVERPAINTING: Can be overpainted with Synthetic- or Acrylic Lacquer after the lower layer is completely cured (after 24h).

DRYING TIME AT 20°C (68°F) AND 50% RELATIVE HUMIDITY:

- Dust dry: after approx. 2-3min

- Touch dry: approx. 10min.

- Fully cured after 12h

Drying time depends on temperature, humidity and thickness of coating.

OPTIMAL PROCESSING CONDITIONS:

- Temperature 10° - 25°Celcius

- Surface temperature 5° - 40°Celcius

- Air humidity max. 60%

SHELF LIFE / STORAGE: 10 years with proper storage (10°-25°C, relative humidity of max. 60%).

DANGEROUS GOODS INFORMATION

- Dangerous goods class 2.1

- UN1950

FREQUENTLY ASKED QUESTIONS

What are the main characteristics of Montana BLACK?

The Montana BLACK range is the ultimate graffiti art making tool. It is high pressure, nitro-combi based, features 187 powerful, high covering colors. It has a matte finish with a soft touch high performance valve for the perfect balance of accuracy and maximum coverage in the shortest time.

Is Montana BLACK the same as Montana GOLD?

Montana BLACK is not the same as GOLD. BLACK has higher pressure that enables greater output in a shorter time. It dries faster and is more matte in finish. All the colors are optimised for greatest opacity.

Montana BLACK winterproof?

Absolutely! Montana BLACK is possibly the best performing spray can in extreme weather conditions. It has been proven to perform perfectly in cold temperatures. Please note that a drop in can pressure can begin to occur when the temperature reaches 0° and below. For best performance it is important to keep your cans warm for as long as possible.

Can I apply Montana BLACK wet on wet?

Yes you can apply Montana BLACK colors immediately wet on wet even though it is the fastest drying of the Montana-Cans range. Please note reactions may occurr if normal Montana BLACK colors are applied over metallic or tar based colors. We recommend applying these after the metallic or tar based colors have dried.

Can I combine my Montana BLACK with other spray paints?

Yes you can combine your Montana BLACK with other cans if the other cans are applied after the Montana BLACK has dried. If non compatible cans are applied over wet Montana BLACK, cracks and reactions may occurr due to incompatibility.

Is the Montana BLACK range lightfast and UV resistant?

Montana BLACK is extremely light fast using only the highest quality European pigments and added UV blockers to increase the longevity and vibrance of the color. Please note the longevity of all paints will be subject to variables like exposure to UV light, exposure to the ellements, pre-treatment of the substrate or amount of coats applied. For a guide on color opacity and saturation, consult our Montana BLACK color chart here https://www.montana-cans.com/en/spray-cans/spray-paint/black-50ml-600ml/montana-black-400ml or grab a printed color chart at your local Montana Cans supplier.

Is the Montana BLACK color range in the RAL system?

All though many colors from other color systems may appear similar, the Montana BLACK color range is a unique color system created by us that was developed by some of the worlds best graffiti artists for graffiti artists. It is not part of any other system.

How long does Montana BLACK take to dry?

Drying time is usually between 3-5 minutes but can vary depending on substrate, ambient temperature, humidity levels and thickness of coats applied. Montana BLACK can be applied immediately wet on wet with other Montana BLACK colors (non metallic or tar).

Pls Note:

This technical application information is given to the best of our knowledge. However, it is only intended as non-binding information and does not release you from the obligation to carry out your own tests on the products supplied by us to determine their suitability for the intended applications. Application and processing are beyond our control and are therefore in the responsibility of the user. Montana Cans shall be released from liability

unless the liability-based incident is caused by a fault incurred to Montana Cans.

Did this answer your question?