Skip to main content
ULTRA WIDE
Updated over a week ago

GENERAL INFORMATION

Montana ULTRA WIDE 750ml Graffiti/Urban Art/Street Art purposes.

Note: Always test beforehand, if surface/material is compatible!

FEATURES

- For work under time pressure

- For large area work

- Calligraphy Tool

INSTRUCTIONS FOR USE

Shake can vigorously for 2-3 minutes before use.

APPLICATION INFORMATION

- Surfaces should be dry and clean of oil, dirt or rust free

- Shake the can well for at least 2 - 3minutes

- Spray distance should be at least 30-40cm

- Beware of wide output

- Do not spray near any electrical power sources

- To expand the lifespan of the paint layer, it should be treated with Montana Varnish Spray

PRODUCT INFORMATION

PRODUCT NAME: Montana Cans ULTRA WIDE 750 ml

ITEM#: Miscellaneous

EAN-CODE: Miscellaneous

HS CODE: 32082090

COUNTRY OF ORIGIN: Germany

TECHNICAL INFORMATION

CONTENT: 750ml

TYPE OF VALVE: Male

NOZZLE: Montana Ultra Wide Cap ( Female )

RECOMMENDED NOZZLES: Montana Ultra Wide Cap/Ultra Wide Liner (not compatible to standard Montana nozzles)

LAQUER BASE: Nitro-Combi

PRESSURE LEVEL: High pressure

COLOR RANGE: 8 colors

GLOSS LEVEL: (60° angle according to DIN 67530): 77 GE gloss

HEAT RESISTANCE: Up to 80°C (176°F)

COVERAGE: High coverage

OVERPAINTING: Can be overpainted with Synthetic- , Acrylic Lacquer after the lower layer is completely cured (after 24h).

DRYING TIME AT 20°C (68°F) AND 50% RELATIVE HUMIDITY:

- Dust/Touch dry: approx. 10/60 min.

- Overpainting after 24h.

- Fully cured after 24h

Drying time depends on temperature, humidity and thickness of coating.

OPTIMAL PROCESSING CONDITIONS:

- Temperature 10° - 25°Celcius

- Surface temperature 5° - 40°Celcius

- Air humidity max. 60%

SHELF LIFE / STORAGE: 10 years with proper storage (10°-25°C, relative humidity of max. 60%).

DANGEROUS GOODS INFORMATION

- Dangerous goods class 2.1

- UN1950

Pls Note:

This technical application information is given to the best of our knowledge. However, it is only intended as non-binding information and does not release you from the obligation to carry out your own tests on the products supplied by us to determine their suitability for the intended applications. Application and processing are beyond our control and are therefore in the responsibility of the user. Montana Cans shall be released from liability

unless the liability-based incident is caused by a fault incurred to Montana Cans.

Did this answer your question?