Montana TARBLACK for Graffiti/Urban Art/Street Art purposes.

Note: Always test beforehand, if surface/material is compatible!

- For work under time pressure

- For work on highly absorbent surfaces

- Perfectly suitable for the overpainting of chrome effects

Shake can vigorously for 2-3 minutes before use.

- Surfaces should be dry and clean of oil, dirt or rust free

- Shake the can well for at least 2 - 3minutes

PRODUCT NAME: Montana Cans TARBLACK 500/600 ml

ITEM#: Miscellaneous

EAN-CODE: Miscellaneous

HS CODE: 32082090

COUNTRY OF ORIGIN: Germany

CONTENT: 500 / 600ml

NOZZLE: Fat Cap Black/ Orange

RECOMMENDED NOZZLES: Fat Caps
​

LAQUER BASE: Bitumen
​

PRESSURE LEVEL: Low pressure (500ml) / High pressure (600ml)

COLOR RANGE: 1

GLOSS LEVEL (60° angle according to DIN 67530): 4 GE matte
​

HEAT RESISTANCE: Up to 80°C (176°F)

COVERAGE: High coverage

OVERPAINTING: Can not be overpainted
​

DRYING TIME AT 20°C (68°F) AND 50% RELATIVE HUMIDITY:

- Dust/Touch dry: approx. 10/60 min.

- Fully cured after 24h

Drying time depends on temperature, humidity and thickness of coating.

OPTIMAL PROCESSING CONDITIONS:

- Temperature 10° - 25°Celcius

- Surface temperature 5° - 40°Celcius

- Air humidity max. 60%

SHELF LIFE / STORAGE: 10 years with proper storage (10°-25°C, relative humidity of max. 60%).

- Dangerous goods class 2.1

- UN1950

Pls Note:

This technical application information is given to the best of our knowledge. However, it is only intended as non-binding information and does not release you from the obligation to carry out your own tests on the products supplied by us to determine their suitability for the intended applications. Application and processing are beyond our control and are therefore in the responsibility of the user. Montana Cans shall be released from liability

unless the liability-based incident is caused by a fault incurred to Montana Cans.