GENERAL INFORMATION:

Montana STENCIL Spray is a extremly fast drying, high-coverage spray paint specially designed for stencil techniques on surfaces like paper, cardboard, and foil. With a non-sticky finish, it’s perfect for applications where precision and speed are essential.

• Extremly fast drying to prevent stencil sticking and improve workflow

• Non-sticky finish for smooth handling of stencils

• Excellent coverage to prevent paint bleeding

• Superior adhesion on various surfaces with partly saltwater resistance

• Low-odor, works for indoor and studio use

• Available in matte Black and White

Shake the can vigorously for at least 3 minutes before use. For best results, apply at a distance of approximately 15 cm, using thin, even layers. Allow the paint to dry briefly between coats, and let stencils dry before reusing to avoid unwanted marks.

STENCIL Spray is not recommended for use directly over Montana GOLD, BLACK, or EFFECT paints, as cracking may occur. However, once fully cured (around 12-24 hours depending on substrate and outside temperature), it can be overpainted with Montana GOLD, Montana BLACK, or EFFECTs for a lasting finish. Avoid using in high humidity to maintain the matte effect.

PRODUCT NAME: Montana STENCIL Spray

ITEM CODE: Miscellaneous

COLOR NAME:

• Black: 472732 (9000)

• White: 472725 (9100)

CONTENT: 400ml, necked-in can

NOZZLE: Flat-Jet Medium

VALVE: 62201 (similar to Montana GOLD)

TECHNICAL INFORMATION:

BINDER BASE: Polyvinylbutyral (Special)

PRESSURE LEVEL: Medium-pressure

ODOR: Very low odor

GLOSS LEVEL: Very matte (<4 GU)

DRYING TIME (at 20°C / 50% relative humidity):

• Dust-dry: approx. 30 sec

• Touch-dry: approx. 1 min

• Fully cured: approx. 2 hrs

Drying time varies with temperature, humidity, and coat thickness!

HEAT RESISTANCE: Up to 80°C

COVERAGE: Excellent

OVERPAINTING: After approx. 12 hours, can be overpainted with Nitro-Combi or acrylic varnishes. Repainting directly on other lacquers may cause cracking. (To be sure, wait 24 hours – depending on substrate and outside temperature).

• Ambient temperature: 5° - 25°C

• Surface temperature: 5° - 30°C

• Max humidity: 60%

• Hazard Symbols: GHS02, GHS07

• Shake well for a minimum of 3 minutes

• Spray distance: 15 cm

• Apply in thin layers for best results

• Allow stencils to dry briefly before re-stacking

• Avoid using directly over Montana GOLD, BLACK, EFFECT paints to prevent cracking

• Suitable for small, detailed work rather than large surfaces to prevent patchiness

Montana STENCIL Spray is a specially formulated, extremly fast-drying spray paint for stencil applications on paper, cardboard, and foil. It prevents stencils from sticking and offers excellent coverage without bleeding, making it ideal for detailed work.

STENCIL Spray works best on paper, cardboard, plotter foil, and other surfaces like wood, concrete, or brick walls. While it adheres to a variety of surfaces, it’s not recommended for smooth metals and large surface areas, as it may lead to uneven patches.

This product is perfect for artists, street artists, designers, advertising professionals, and workshop participants. It's also ideal for guerilla marketing campaigns and general marking needs, thanks to its extremly fast drying and low-odor qualities, making it suitable for indoor and studio settings as well.

Hold the can 15 cm from the surface and apply in thin, even layers, letting each layer dry briefly. Shake the can for 3 minutes before each use to ensure an even application.

Yes, STENCIL Spray is suitable for both indoor and outdoor applications. Its low odor makes it ideal for indoor projects, and it is partly resistant to saltwater, making it suitable for some outdoor projects as well.

Yes, once STENCIL Spray is fully cured (after approximately 12 hours), it can be overpainted with Montana GOLD or BLACK. Applying STENCIL Spray directly over other lacquers is not recommended due to potential cracking.

This technical information is provided as general guidance and does not substitute individual testing. Montana Cans is not liable for results beyond direct product performance. We recommend always to test spray on a non-visible area to check compatibility of lacquer on the used substrate.